I Need A Bigger Bed

by | May 18, 2016 | 12 comments

Roubo pole lathe

This image is from Gary at the Toolmera Press website

I have a few jobs coming up that require turnings, turnings that are quite a bit bigger than my little compact bungee bench lathe. Some of the turnings are also out of the heavier stuff, so my little compact bungee wouldn’t only need more length, but it would need to be of a much heavier build as well.

At least that’s what I’m telling myself.
It’s an excuse you see, fabricated so I can justify the build of Roubo’s lathe (do you ever do that?).

Just like his bench, Roubo’s lathe is of a rather heavy build. This is critical, as most of what I’ll turn is of the dry stuff, which requires a lot more force than the wet green stuff, that we mostly associate pole lathes with.

A lot of us will have seen Roubo’s scratty drawing of the lathe (which is shown above) and with all of his writing being in old French, I thought this is all I’d have to go off. But… oh no… I got very lucky and stumbled across this, The Christian Tool Cabinet were Bob Jones’ interest in the lathe had led to Don McConnell of Old Street Tool, Inc  providing a transcription of the text, which Bob has made effort to translate. That’s about 5000 words, all on that lathe… I’ve read it about ten times, made notes, but still haven’t fully digested it.

If you have time, I urge you to pop over there and have a read, then we can get back to talking about this lathe. Having more minds on this is certainly going to help… Also leave a little thanks,  a huge thanks to Bob, Don and Gary, three more names on my pot of tea/pint list.

More to follow.

Related Posts

About Richard Maguire

About Richard Maguire

As a professional hand tool woodworker, Richard found hand tools to be the far more efficient solution for a one man workshop. Richard runs 'The English Woodworker' as an online resource and video education for those looking for a fuss free approach to building fine furniture by hand. Learn More About Richard & The English Woodworker.

12 Comments

  1. Jasper

    Richard,
    When I asked you a while ago: “Why don’t you build yourself a proper bed?”, this is not what I had in mind. 🙂

    I will read the text later and see what I find.

    Perhaps there’s someone near you who has a large lathe? One does not have to own everything. I mean, this is a hefty contraption. But I understand it is a good excuse…

    Reply
  2. Steve Tripp

    Have you also considered a treadle lathe? I’ve been vacillating between spring pole and treadle and am thinking the treadle will be more difficult to make, but easier to use. And since I’m a novice turner, but comfortable with the build process, I may follow the path of least resistance.

    I am extremely interested in this conversation, whichever way it may turn though.

    Reply
    • Arthur van der Harg

      Umm… Google Translate yields texts that allow you to catch the gist of what is said, if the text is not too complicated and uses a modern vocabulary. Putting in Roubo… Well, the result uses English words and I’ll grant it seems to cover the same subject. Trying to piece together the details of this lathe’s construction? I’d say you’re better off trying to find a woodworker who speaks French.

      Reply
  3. Christopher Barnes

    This is my favorite part.
    “Masters where Carpenters are not turners, and as this book is for all countries equally, it would be make it incomplete if I did do not cover at least the basics of the lathe (Tour a pointe), which strictly speaking, the Carpenters can do without, at least for ordinary works.”

    Reply
  4. Damien

    I think there are simpler designs than Roubo’s. Most of the time I see his double legs replaced by a larger single leg (extended to a fixed head on one side). This can simplify the joinery. He was mostly modern, by the nineteenth century the Tour a pointe is dated: no bearings or treadle.

    Reply
  5. Patrick

    Try contacting Don Williams at:

    http://donsbarn.com/contact/

    He might have the section already translated for the next Roubo volume coming soon via Lost Art Press and could definitely provide some valuable insight.

    Good luck.

    Reply
  6. Igor

    Hi,

    Thank you Richard for this inspiring post. If I may add for all your readers:

    While reading that 5000 word translatio, I felt I desperately needed drawings to generate a better understanding. As Richard mentioned the reference to the Toolmera blog as the source for the picture in his post, I headed over there and was happy to see 2 complete drawings, have a look at: http://toolemerablog.typepad.com/toolemera/2012/01/roubo-spring-pole-lathe-images.html
    (There is also a download link on that webpage for a high-resolution PDF of the drawings)

    In addition, I also enjoyed the interview with early Roubo lathe pioneer Warren Mickley on the the christian tool cabinet blog. (https://thechristiantoolcabinet.wordpress.com/2014/01/12/roubo-lathe-in-use-today/)

    Reply
    • Steve Tripp

      This is great information, Igor. Thank you.

      Reply
  7. Pete Maddock

    Richard, I can see this is going to be an interesting project and not one to be “knock-up in five minutes”.

    If you do take it on, I for one would like to hear how you get along with it. And it would be even better if you were to ask Helen to film the build, so we could ALL see how you get along with it.

    Anyway, if you do take on.
    Best of Luck Lad, and I hope it all goes well.

    Reply
  8. Kermit

    I visited a small historical museum in Aurora, Oregon, USA, (south of Portland) about 50 years ago. In the collection was a massive, wooden, flywheel lathe. It was so large that the operator stood on a raised plank walkway to operate it. The treadle ran the full length of the machine which was somewhere around 10′ between centers. The description said it was used to turn fancy porch posts for the community, a quasi-socialist utopian group, IIRC. It was an impressive machine, obviously made by the woodworkers, with contributions by a skilled blacksmith. It dated from sometime in the second half of the 19th century.

    Reply
  9. Steve

    Does anyone else think that lathe looks like it has been designed for someone who is left handed and footed? It’s got the screw advanced centre on the left hand side and the treadle looks like it’s easier to to push with your left foot. In my experience it’s nicer to use a treadle that you can easily use with either foot so that you can give you dominant leg a rest. Mike Abbots design is good like that. His also includes the ability to steer the cord up and down your work so you can change the position of the cord without moving the treadle.

    Reply
  10. Tom Lokken

    David, if I may, Have you seen any plans for a lathe powered by a bicycle wheel, utilizing a gear, chain, freewheel and pedal for power. Enjoy your emails immensely. Tom Lokken

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Subscribe to Updates:

Related Posts:

Chair Building Basics – New Video Series!

https://youtu.be/NBTqW5t3HGs   In our latest series we learn how to build a chair. Chapter One is already live. This series can be purchased by Clicking Here. If you're already a Member then you may need to Login First. Chair building can require specialist tools...

Build A Hall Table – Online Video Series

https://youtu.be/QhZmhGAMFFk   Our latest video series is the build of a traditional Hall Table For Full Details & To Purchase CLICK HERE As you'll expect, we build the whole piece with basic hand tools. The focus with this project is learning how to build by...

Two Steps Forward, Two Steps Back

A lathe is pretty straight forward. You get a bit of wood spinning, and then gracefully shove a sharp implement into it. As it spins, material is removed evenly from around the centre point, and you end up with your turning. How we get the wood spinning though is the...