The English Woodworker

Learn Woodworking Online

  • Blog
    • Video Posts
    • Hand Tools
    • Techniques
    • Workbenches
    • All Posts
  • The Videos
    • The Nest of Tables
    • Build A Danish Stool
    • The Trestle Table
    • The Industrial Desk
    • Build A Retro Sideboard – Online Video Series
    • Build A French Workbench
    • The Raw Edge Coffee Table
    • Chair Building – The Basics.
    • Build A Hall Table
    • Get Sharp – Sharpening Edge Tools
    • The Side Table & Bridle Guides
    • How To Build A Workbench – Online Video Series
    • The Spoon Rack – Hand Tool Course
  • About Us
  • Gallery
  • LOGIN

The Plane Build – Video

October 12, 2017 By Richard Maguire 13 Comments


Watch The Full Video in our Members’ Site. 

It’s available to all For FREE!

Login Now if you already have an account.

OR

Create a Free Account Here


So… Why Build Your Own Wooden Plane?

When you can get a smashing Stanley No 5 for about thirty five quid, why hassle yourself making a wooden plane?

The thing is, No 4s are naff.

And metal jointers get expensive (for the good ones). And they often will need a fair bit of awkward work to make serviceable.

The No 5 is the sweet spot.

Anything else? Well unless your willing to spend, it’s easier to just make one.

And if it’s not about the money, then perhaps you simply like the idea of working with your own handiwork.

There’s lots of people who want to get into wooden planes, but they’re often faced with one big problem.

New ones cost a bomb (unless you go for an ECE).

So rather than spending, you could be sensible, and get that old thing that’s been laying around your workshop for the last decade going again.

Or get a cheap Ebay special.

Then you’ll spend a weekend in restoration mode, give it a go…
…and come to the conclusion that wooden planes aren’t the tool for you.

The thing’s too much of a pig to set up. “I’m glad I didn’t spent a bomb on a new one.”

I say this a lot, but I’ll say it again.

The vast majority of wooden planes out there, I would not be able to set.

Restoring a wooden plane takes almost as much skill as making one in the first place.
And I regard traditional plane making as a top end skill. It’s an art.

All the traditional woodies that are in service in my workshop have been given to me, mostly from my Grandad when I was a very young man.
They were never out of service. My old tools are not restored.

Learning to set a wooden plane that’s out of shape isn’t going to work. It’s not you, it’s the tool.

So whether you’re looking to build because you’re in need of a serviceable tool, or just seeking the thrill or using one you’ve built yourself, our Plane Build Mini Series covers the build from start to finish, and also has an additional video to talk you through the steps for setting your new tool to put it in action.

The Design Of Our Wooden Plane

I designed this plane to get people over the frustration of wooden planes.

I want people to succeed.

That meant going for the laminated construction with the cross pin.

This is often frowned upon compared with the traditional abutment style. But I promise, as a life long wooden plane user, they’re only looked down on because they’re easier to make.

Building in this style with the right methods will make this build fairly fool proof.

Far, far easier than restoring an old thing.

The critical areas are easy to get right, and that’s what’s going to get you a good setting plane.

Keeping It Traditional

The wheel is good at its job, so leave it alone.

I’ve had a slight dislike to laminated planes in the past. The reason was the fact that everyone tried to get clever.

They’ve got racing stripes… Weird carved out glove handles.

They all just look unfunctional.
The reason the wooden hand plane looks like it does, is because that’s what’s best.

Not for looks but for function.

You can hold it with multiple grips, it’s well balanced and hardwearing, and carries enough weight to give itself a bit of momentum.
It also soaks up vibrations beautifully.

Getting Results

Making a plane look nice takes far longer than making a plane work.

The original ‘One Hour Rough As Chuff Special’ works just as well as the fancy thing we’re making in the build video.

My recommendation is to make your first plane rough and fast.

Follow the instructions and focus on the critical areas to get a feel for how the whole thing works.

Once you’re happy, fill your boots and make your posh one.

I promise you’ll make more than one.

They’re addictive.

Being able to make a plane of any size, or for any purpose, and know it will work, is a very nice feeling.

Ever wanted a low angle shooting plane?

Give yourself a few hours and now you’ll have one.

I hope that after this you’ll give wooden planes a shot.
In fact I’m certain you will.

Want to Build a Wooden Plane?

Just log in – your video awaits…
This Mini Series is available to all, completely for free.

Login Now if you already have an account.

If you’ve never ventured to the other side, then don’t worry. You can create a free account here. It’s simple.
Even I could do it!
(And there’s no credit card details or anything like that.)

Filed Under: Free Videos, Make Your Own Tools

Related Posts

how to correct a mortice and tenon
The Fix For An Out Of Square Mortice & Tenon – VIDEO
The Hand Plane Build – Getting Prepped
User made wooden planes
User Made Hand Planes Discussion – VIDEO


Browse the Xmas Discounts!


About Richard Maguire

As a professional hand tool woodworker, Richard found hand tools to be the far more efficient solution for a one man workshop.
Richard runs 'The English Woodworker' as an online resource and video education for those looking for a fuss free approach to building fine furniture by hand.
Learn More About Richard & The English Woodworker.

« What’s Been Simmering?
How To Set A Wooden Plane »

Comments

  1. Peter says

    October 12, 2017 at 10:25 pm

    Tomorrow, I will dive into the sofa, and enjoy this little gem!

    Reply
  2. Martin Jäger says

    October 12, 2017 at 11:48 pm

    Thank you a lot, still have done hock blades.

    Reply
  3. George Lough says

    October 13, 2017 at 1:02 am

    Older I get the less power I want. More and more hand tools. Planes not routers.

    Reply
    • Martin says

      October 13, 2017 at 7:35 pm

      Absolutely agree, much more satisfying using a woody.

      Reply
  4. roccaways says

    October 13, 2017 at 4:35 pm

    Good to see you back Richard!

    Reply
  5. Martin says

    October 13, 2017 at 7:33 pm

    Ah yes ! About chuffin time Richard, looks well worth the wait mind. Really looking forward to smashing one of these out, I love a good wooden plane. Well done mate.

    Reply
  6. Ken Haygarth says

    October 13, 2017 at 10:12 pm

    Great job Richard and Hellen, thanks guys. 😉

    Reply
  7. Neil Christie says

    October 16, 2017 at 9:00 pm

    On good form Richard.
    If you or Helen could design a device to prevent pencils and tapes from vanishing into thin air, I would buy the video !
    Liked your comment about the naffness of no4s. I started out with one and couldn’t plane worth a light with it. The big toe on the 5 makes all the difference.

    Reply
  8. James says

    October 17, 2017 at 6:44 pm

    Flabbergasted at how easy you make things look you are a joy to watch and you both should be very proud to make these videos and inspiring all sorts of people to try for themselves many thanks James D

    Reply
  9. Duane Peterson says

    October 20, 2017 at 8:01 pm

    I’ve been waiting for this video for awhile. I’ve got a nice 2 inch thick teak plank that I think I’ll use when I get the chance to try out making a jack plane. Looking forward to it.

    Reply
  10. Bill R. says

    October 21, 2017 at 10:41 pm

    Richard, great video, thank you! One question, during the glue up of the body you use yellow or white glue and when gluing up the wood pin and handle you use hide glue. Would hide glue alos work fo the body glue up?

    Reply
  11. Walter Ambrosch says

    October 23, 2017 at 6:51 pm

    Richard,
    In my wood plane builds I have begun adding a wear bevel to the breast angle so that as the sole wears, the mouth does not open up rapidly.
    What are your thoughts on this?
    So glad you are back doing the blog and the videos.
    Peace

    Reply
  12. Fred says

    January 30, 2019 at 7:05 pm

    The Plane Build instructional video is EXCELLENT! I built mine in 4 pieces. It’s very important to have the blade and wedge in the exact position so that one can scribe an accurate line to locate and drill the wood pin hole. Before assembly, I lay all of the components (rear and front blade beds, blade, and wedge) in their final locations and marked them accordingly on one of the side halves then locate the dowel hole with a circle template. Then I place the 2 halves together to drill the hole only once. When glueing, I prefer to glue the components onto the marked side, let set, and then glue the remaining side to ensure symmetry. This also allows adjustment should glue cause slip when clamping.

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Subscribe to future posts:

 

Subscribe to future posts:

  • Blog
  • The Videos
  • Sign Up!
  • Contact Us
  • Keep Up To Date
  • LOGIN
  • Privacy Policy
  • Terms & Conditions
  • Facebook
  • Instagram
  • RSS
  • YouTube

Fancy Building Your Own Wooden Plane?

We’ve created a step-by-step video.
Download the PDF plans & follow along!

We’ve also included a video guide on how to set & adjust your wooden plane. Sign Up & Watch For Free

  • Blog
  • The Videos
  • Sign Up!
  • Contact Us
  • Keep Up To Date
  • LOGIN
  • Privacy Policy
  • Terms & Conditions

Copyright © 2023 · The English Woodworker

Scroll Up