Our line shaft machinery was originally built and purchased in around the 1900's and the fantastic thing for us is that it was used by the same business right through its life up until 1993 when they finally closed their doors. When we purchased the machines we...
Once the top had been glued together and fully cured I removed the clamps and left it one side to allow it to stabilise. I don’t know the exact reason but after such a large glue up the top can be quite unstable for a short length of time so I give five days or so for...
In my opinion the leg vice is the finest vice ever invented but I know that many people will disagree with me and much prefer the familiarity of say a good old ‘Record’ type face vice. There are many reasons that I favour the leg vice; it has an excellent capacity,...
We’d been invited on Saturday to take part in the Open Day at Peter Sefton’s Furniture School down near Worcester and we’d just like to thank Peter and his team, students and all of you who came along for a lovely day. Being our first visit to the school we were very...
Once we’d made a start at cleaning up the saw we had to bring our attention to the electrics. We knew that they would work as we’d seen the saw running back in Kent but they were very old and we’re not that keen on fires! The bearings inside the motor didn’t appear to...
Amidst the chaos everyday it’s easy for us to become engrossed in our work and focus solely on the day to day occurrences and hiccups. Fortunately we have some very lovely customers and often it’s them who encourage us to take a minute and remember just what it’s all...
We've exhibited at the European Woodworking show every year since its beginning almost four years ago and will be returning for another busy weekend on the 22nd and 23rd September. The event grows every year and includes something for every woodworker with...
I just popped out and left Richard to get on with building the new table for the cross-cut saw. I got back to find what looked more like a workbench. This rather sturdy looking table design has been giving him a bit of mental grief for a couple of weeks now as he's...
You’ll be pleased to know that all of the machinery made it back to our workshop safe and sound after Richard’s trip down to Kent back in April. The details have been left in limbo as on day two the photos were taken by various visitors and we’re just gathering them...
The top is made up of three slabs which meant there was only two joints to worry about but because these are wide slabs there wasn’t any room for sloppiness. If I’d tried to just clamp poor edge joints together on sections this large then the joint would be...
Related Posts:
No, you don’t. As a hand tool woodworker you are fully self sufficient without a bandsaw. At least as long as there's tea in the pot. But if there's one machine that can aid the hand tooler the most, this would be it. When I shunted out my machines at the close of the...
The day is Sunday, at least it is as I write this. The sun is also really shining. It’s also my first day off in quite some time. I’m sat with my notebook on a bit of beach that may as well be Mars. I come here quite regularly to write, think, sing? And in the...
I'm in a unusual position for a learner. I can observe Richard working, then pick up his tools and try for myself. I know the tools work well, and you could envy that. But the thing is, it takes away the one excuse that all novices need. I can't blame my tools. When...